Solo Vaporizer Introduction

The Solo Vaporizer is a new Portable Vaporizer manufactured by Arizer in Canada that uses a rechargeable Lithium Ion battery and features a Stainless Steel heating element with a high quality Glass Mouthpiece

Utilizing a sleek and compact design concept, the Solo Vaporizer measures 4. “ in Height and 1. 5” in Diameter, conveniently fitting inside the palm of your hand.

A rock solid aluminum outer shell accompanies the Solo Vaporizer, protecting the unit from scratching and general wear and tear. Internally, a solid foundation surrounds the Stainless Steel heating element, adding an extra layer of durability.

How the Solo Vaporizer Works

The Solo Vaporizer operates in 4 easy steps.

First, turn on the Solo Vaporizer by pressing both the up and down arrow buttons. This immediately begins the heat up process and activates the stand-by temperature setting which is relatively close to the first heat level. ?

Now, select one of the 7 available temperature settings and allow the Solo Vaporizer to heat up for up to 1 to 2 1/2 minutes, depending on your temperature preference.

Once the Solo Vaporizer reaches the desired temperature, take the Vapor Wand and pack the blend into the filling chamber.

Next, flip the unit itself upside down so the heating element is facing the floor and connect the whip to the heating element. Now flip it back so the heating element and Vapor Wand are both pointed upwards, indicating the Solo Vaporizer is ready for use.

To induce Vaporization we recommend waiting 10 seconds for the blend to heat inside the chamber and then apply long, steady breaths. The density of the Vapor depends on the temperature setting.

Solo Vaporizer Multiple Temperature Levels

The Solo Vaporizer is equipped with a maximum 2 1/2 minute warm up time and features an advanced temperature control with 7 different levels.

Here are the available temperature levels along with the average warm up times:

• Level 1-50°C / 122°F (15 sec)
• Level 2-185°C / 365°F (1 min)
• Level 3-190°C / 374°F (1 min 10)
• Level 4-195°C / 383°F (1 min 30 sec)
• Level 5-200°C / 393°F (1 min 50 sec)
• Level 6-205°C / 401°F (2 min 10 sec)
• Level 7-210°C / 410°F (2 min 30 sec)

Solo Vaporizer Efficiency / Effectiveness

The Solo Vaporizer’s new stainless steel heating element produces a clean, visible, stream of Vapor after the two 1/2 minute heat up time.

Combined with the multiple temperature options, patrons can locate their preferred temperature and enjoy a quality Vapor.

Solo Vaporizer Extended Vaporization

Keeping the customer in mind, the Solo Vaporizer offers over 4 hours of continuous Vaporization per full charge.

A 4 hour time period is needed for the Solo Vaporizer to completely charge.

Solo Vaporizer Automatic Shut-OFF

Another feature accompanied with the Solo Vaporizer is the built-in automatic shut off safety setting after 12 minutes of idle time.

To reactivate the temperature, simply turn it back on and press the “Downward Arrow” Button for a couple of seconds to return to the desired temperature level.

Solo Vaporizer Maintenance

In terms Maintenance, the Solo Vaporizer comes with a unique cap that covers the heating element when not in use. This will stop dust and any other possibly harmful materials getting in there with the heating element. The Glass Mouthpiece and screens can be cleaned with Vaporwholesalers.com Wipes.

Solo Vaporizer Warranty

The Solo Vaporizer features a two year manufacturer’s warranty, restricted to normal use. Due to quality craftsmanship, the Solo Vaporizer’s Heating Element is backed by a lifetime manufacturer’s warranty.

Solo Vaporizer Warranty

The manufacturers warranty covers defects in materials and workmanship which occur with normal use of the Solo Vaporizer and when it has been purchased from an authorized retailer.

Solo Vaporizer Warranty is valid no more than 2 years from the purchase date or as required by law.

The Solo Vaporizer is guaranteed to be free of manufacturing defects and in proper working condition when you receive your order.

Should your order arrive and the Solo Vaporizer is defective, a replacement will be provided free of charge. To obtain your replacement, contact Vaporwholesalers.com within 7 days of receipt of your order.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations based on the duration of an implied warranty.

The limitations and exclusions written above may not apply to you. The Solo Vaporizer warranty gives you specific legal rights, and you may have additional rights based on your state law. Other restrictions may apply.

How to Use the Solo Vaporizer

Step 1: Turn on the Solo Vaporizer

Turn on the unit by pressing both the up and down arrow buttons and it will immediately begin to heat up to its standby temperature which is relatively close to the first heat level. This makes heating faster after you select a temperature level.

Step 2: Set your temperature level

Next you want to set which level you want to vaporize with. The temperature levels are as follows:

Temp Level 1:
50 C / 122 F

Temp Level 2:
185 C / 365 F

Temp Level 3:
190 C / 374 F

Temp Level 4:
195 C / 383 F

Temp Level 5:
200 C / 392 F

Temp Level 6:
205 C / 401 F

Temp Level 7:
210 C / 410 F

You want to start around temperature level 2 and then adjust from there. 365 degrees Fahrenheit is a recommended starting point to experience Vaporization.

Step 3: Fill the Solo Vaporizer

Take your whip style mouthpiece and pack your material into the bowl end of it. Before doing so make sure if you do grind your material that you do not grind it too fine for two reasons. First there is no screen, only two little holes in the glass, so finely ground particles could sneak through. Secondly, the material, when grounded up too fine, can fall into the heating element and will require you to clean it more often.

Next, flip the unit itself upside down so the heating element is facing the floor and connect the whip to the heating element. Now flip it back so the heating element and whip are both pointed upwards now.

Step 4: Begin use of the Arizer Solo

A ten second wait time is recommended before you start drawing from the Solo Vaporizer with slow, steady breaths.  Make sure when pulling you do not pull extremely hard because you can get some of the material into the whip, which is not something you want not only because you’ll get material in your mouth, but it will also require more frequent cleaning.

Step 5: Clear the chamber of the Solo Vaporizer

When you are done use make sure you fully clean the bowl out of the vaporized blend. This will cut down on cleaning in the future. Also, always cap the heating element with the cap that is attached to the unit. This will stop dust and any other possibly harmful materials getting in there with the heating element.

For a limited time take advantage of the Solo Vaporizer Combo that comes complete with:

• Solo Vaporizer $349.99

POWER PACK, Vaporwholesalers.com Exclusive

• *Free 1-5 Day Air Shipping $29.99
• Limited Edition 18" x 24" Poster $9.99

List Price: $389.97
Our Price: $224
You Save: $204.97

That's over a 40% Savings, what are you waiting for?

Solo Vaporizer Includes:

• 1 pc. Solo Vaporizer
• 2 pc. Vapor Tubes
• 1 pc. Recharging Cord
• 1 pc. Aromatherapy Dish
• 1 pc. Solo Vaporizer Instruction Manual